Advance Search
Category
News
Click here to find out how to clean and seal your tiles and grout in 10 minutes.
Waterproofing without removing tiles using a strong sealant which replaces the existing one and fills the gap
Toughened glass frameless shower screens for any shower application.
Melbourne's leading interior designer, Kent Stringer in Melbourne Victoria Australia

Step 6: Grouting

Call 1300 661 658 / mobile: 0400 228 128 for a free tiling quote

Grouting is when a paste of fine sand and cement is used to fill the gaps between tiles bonding the entire surface. Always mix the grout according to the manufacturer’s instructions. Apply the grout into the gaps between the tiles using a rubber grouter completely filling the gaps and avoiding any air bubbles. Push the grout diagonally across the joints to force it down into the gaps. When completed, wipe off excess grout using a damp sponge. 

Note: Grouting porous tiles like slate, marble or terra cotta may leave grout in the tile causing it to look matted and dull.
          To prevent this, seal the tile before you lay it with a pre-sealer.

Our Tiling Services :Floor Tiling, Wall Tiling, Waterproofing, Sealing tiles, Re-grouting service, Sealing leaking showers, Shower screens, Floor heating, Tiles Supplier, Materials supplier, Reseal wet areas, removal of old tiles and fittings, Surface preparation and so on.
Our Tiles & Tiling Materials :Tiles : Floor Tiles, Wall tiles, Marble tiles, Porcelain tiles, Ceramic tiles, Travertine tiles and so on.
Materials : Additives, Cement Based, Rapid Setting, Premixed mastic, Waterproofing materials, Substrate preparation, and so on.

Step 1 • Step 2 • Step 3 • Step 4 • Step 5 • Step 6 • Step 7 • Step 8 • Step 9 • Step 10

© 2003 - 2018 copyright by Melbourne Tiling Services pty. ltd.  |  Phone:1300 661658  |  Mobile:04 00228 128  |  Sales Department : sales@melbournetiles.com.au  |  Privacy Policy  | Sitemap
youtubeGoogle+twitter