Advance Search
Category

Materials > Waterproofing   

Lampocem

Lampocem

Description:
Ready-to-use shrinkage-free hydraulic binder with rapid setting and hardening.
Application:
Use Lampocem for all types of rapid fixing on both vertical and horizontal concrete and masonry surfaces, for fixing corbels, pipelines, sanitary ware, hangers, and for securing timber and metal grounds.
Lampocem has a very rapid setting time (about 3 minutes at 20°C). Mixed with water Lampocem becomes a paste with a plastic-thixotropic consistency, easy to apply, even on vertical surfaces, without running and no shuttering needed.
Lampocem is a pre-blended powdered binder composed of highly resistant cements and special additives. Preparing the mix: while stirring pour 1 kg Lampocem into a container holding 200-210 grams of water, and hand mix using a trowel until a smooth, lump-free paste is obtained. The mixing-ratio by volume is 3 parts Lampocem to 1 part water. Quickly apply the Lampocem with a flat trowel.
Consumption: 1.8 kg of Lampocem per litre of cavity to be filled.
Packaging: 25 kg bags and boxes containing 4 bags each of 5 kg.
less/more
Coverage:
1.8 kg/litre of cavity
Packing:
25kg
Price/pallet:
48.14 AU$
price
63.19 AU$/unit72.22 AU$/unit
unit(s)
add to cart
Total: 63.19 AU$
Lamposilex

Lamposilex

Description:
Ultra fast setting and drying hydraulic binder for plugging water leaks.
Application:
Use Lamposilex to plug any source of water, even under pressure, in basements, tunnels, subways etc. and for sealing watertight rigid joints in hydraulic concrete structures, sewers, tanks and canals. Where seepage is present Lamposilex must be used before waterproofing with Idrosilex Pronto.
Once mixed with water Lamposilex forms a paste with a plastic consistency that sets in about 2 minutes.
Preparing the mix: pour 1 kg of Lamposilex into a bucket containing 280 grams of water while mixing very vigorously with a hand trowel until a homogeneous paste is obtained. For measures by volume, mix 2.5 parts of Lamposilex with 1 part of water.
Immediately apply the Lamposilex using a gloved hand.
Consumption: 1.8 kg per litre of cavity to be filled.
Packaging: 5 kg drums.
less/more
Coverage:
1.8 kg/litre of cavity
Packing:
5kg
Price/pallet:
23.32 AU$
price
30.61 AU$/unit34.98 AU$/unit
unit(s)
add to cart
Total: 30.61 AU$
Mapeband

Mapeband

Description:
Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membranes.
Application:
Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membranes.
For sealing and waterproofing joints to wall and floor of baths, showers, terraces, balconies, etc., that are to be tiled with ceramic tiles, marble, natural stones.
Mapeband can be used with any type of substrate: concrete, wood, plasterboard, etc.
Mapeband must be bonded on surfaces which are free of oil, paint, dust and loose parts using Adesilex PG4, Mapelastic and Mapegum WPS?(choose the product to use according to the type of application to be carried out).
Strips of Mapeband may be joined with Adesilex T, Adesilex T Super or Adesilex LP.

Packaging:
rolls of 50 m x 12 cm;
sealing gasket for outlets 118 x 118 mm and 300 x 300 mm;
inside corner 90°;
outside corner 270°.
less/more
Coverage:
1
Packing:
50m x 12cm
Price/pallet:
115.5 AU$
price
151.52 AU$/unit173.16 AU$/unit
unit(s)
add to cart
Total: 151.52 AU$
Mapecoat I 24 Grey

Mapecoat I 24 Grey

Description:
Epoxy paint for acid-resistant non-toxic coating of concrete surfaces.
Application:
Mapecoat I24 is used to coat concrete surfaces designed for contact with food products in wine, oil, confectionery industries, etc.
Mapecoat I24 is especially recommended for coating reservoirs built to contain drinking water.
Mapecoat I24 is a two-component epoxy paint. Prior to use, the components must be thoroughly mixed until complete homogeneity is obtained.
Characterized by a low viscosity, Mapecoat I24 can be applied easily on perfectly clean, solid and dry substrates by brush, roller or spray.
After the completion of the cross-linking, Mapecoat I24 forms a non-toxic protective coating that is waterproof and vapourproof.
Consumption: 400-600 g/m2 per coat depending on the type of substrate.
Packaging: 5 kg (A B).
less/more
Coverage:
400-600g/m2 per coat
Packing:
9kg (Part A 4kg+ Part B 5kg)
Price/pallet:
88.59 AU$
price
127.89 AU$/unit146.16 AU$/unit
unit(s)
add to cart
Total: 127.89 AU$
© 2003 - 2019 copyright by Melbourne Tiling Services pty. ltd.  |  Phone:1300 661658  |  Mobile:04 00228 128  |  Sales Department : sales@melbournetiles.com.au  |  Privacy Policy  | Sitemap
youtubeGoogle+twitter