Advance Search
Category
Idrostop

Idrostop

Description:
Hydrophilic expandable rubber section for watertight construction joints.
Application:
Idrostop is a soft preformed flexible strip, with an acrylic polymer base specially designed to form watertight construction joints up to a hydraulic pressure of 5 atm. Idrostop does not contain bentonite. Due to its chemical composition Idrostop gradually expands when in permanent contact with water, creating an active barrier against pressurized water (positive and negative).
Idrostop strip can be applied to concrete, metal, PVC and natural stone with Idrostop Mastic, a ready-to-use solvent-free one-component adhesive with a base of MS polymers.
Packaging:
Idrostop is supplied in 3 sizes in carton boxes:
– Idrostop 10 (size 20x10 mm): 6 rolls of 10 m;
– Idrostop 15 (size 20x15 mm): 6 rolls of 7 m;
less/more
Coverage:
1
Packing:
10mm x 10m
Price/pallet:
117.8 AU$
price
154.67 AU$/unit176.76 AU$/unit
unit(s)
add to cart
Total: 154.67 AU$
Idrostop

Idrostop

Description:
Hydrophilic expandable rubber section for watertight construction joints.
Application:
Idrostop is a soft preformed flexible strip, with an acrylic polymer base specially designed to form watertight construction joints up to a hydraulic pressure of 5 atm. Idrostop does not contain bentonite. Due to its chemical composition Idrostop gradually expands when in permanent contact with water, creating an active barrier against pressurized water (positive and negative).
Idrostop strip can be applied to concrete, metal, PVC and natural stone with Idrostop Mastic, a ready-to-use solvent-free one-component adhesive with a base of MS polymers.
Packaging:
Idrostop is supplied in 3 sizes in carton boxes:
– Idrostop 10 (size 20x10 mm): 6 rolls of 10 m;
– Idrostop 15 (size 20x15 mm): 6 rolls of 7 m;
less/more
Coverage:
1
Packing:
15mm x 7m
Price/pallet:
123.7 AU$
price
162.44 AU$/unit185.64 AU$/unit
unit(s)
add to cart
Total: 162.44 AU$
Idrostop Mastic

Idrostop Mastic

Description:
Single-component adhesive for the installation of Idrostop.
Application:
Idrostop Mastic is a ready to use solvent-free single-component adhesive with a base of MS polymers. On extrusion, it is a thixotropic paste suitable for horizontal and vertical application that cures with humidity at a temperature between 10°C and 40°C to form an elastic product.
Idrostop Mastic also adheres perfectly to slightly damp surfaces provided they are perfectly clean and solid.
To apply, extrude the adhesive onto the surface on the previously cut to size Idrostop, or directly onto the concrete. Press the Idrostop onto the substrate, gently firming it in all directions to ensure complete adhesion.
Concrete can be poured after 24 hours.
Idrostop Mastic is also suitable for bonding joints between pieces of Mapeband.
Consumption: approximately 290 ml for every 12 linear metres of Idrostop.
Packaging: cartons containing 24 cartridges of 290 ml.
less/more
Coverage:
290ml/12m
Packing:
290ml
Price/pallet:
18.38 AU$
price
24.12 AU$/unit27.56 AU$/unit
unit(s)
add to cart
Total: 24.12 AU$
Isolastic

Isolastic

Description:
Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10.
Application:
Isolastic is a latex additive to be mixed with Kerabond, Kerabond T or Kerafloor to improve the performance and deformability to satisfy class C2E (improved cementitious adhesive with extended open time) when mixed with Kerabond or C2 (improved cementitious adhesive) when mixed with Kerabond T and Kerafloor according to EN 12004 and class S2 (highly deformable adhesive) according to EN 12002 requirements. Adhesives obtained this way are suitable for interior and exterior bonding of all types of ceramic tiles (double-fired, single-fired, quarry tiles, klinker, terracotta, glass mosaics, porcelain tiles, etc.) and stone material on conventional substrates, on concrete, precast concrete panels as long as well cured (3 months), heating panels, fibrous cement, plaster board and wood or wood composition panels as long as they are firmly fixed. Installations can be carried out over gypsum-based or anhydrite surfaces only if specifically primed beforehand. Isolastic diluted 1:1 with water can be also mixed with Adesilex P10 to improve its deformability to satisfy class S1 requirements according to EN 12002.

Technical data:
Kerabond/KerabondT/Kerafloor Isolastic:
Pot life: over 8 hours.
Open time: 20 minutes.
Grouting:
-walls: 4-8 hours;
-floors: 24-36 hours.
Set to light foot traffic: 24-36 hours.
Ready for use: approx. 14 days.
Deformability according to EN 12002:
S2 - highly deformable (Adesilex P10 Isolastic diluited 1:1 with water - S1 deformable).
Application: Kerabond/Kerabond T Isolastic: notched trowel n. 4 or 5 or 6.
Kerafloor Isolastic: notched trowel n. 6 or 10 or trowel for Kerafloor.
Adesilex P10 Isolastic diluited 1:1 with water: notched trowel n. 4 or 5 or 6).
Storage: 24 months. Protect from frost.
Consumption: 1-2 kg/m2.
Packaging: 25-10-5 kg drums; 12x1 kg packs.

Kerabond/Kerabond T Isolastic are CE marked, as declared in ITT certificate, respectively nº 25070081/Gi (TUM) and nº 25040265/Gi (TUM) issued by the Technische Universität München laboratory (Germany)
less/more
Coverage:
1-2kg/m2
Packing:
25kg
Price/pallet:
176.3 AU$
price
231.42 AU$/unit264.48 AU$/unit
unit(s)
add to cart
Total: 231.42 AU$
© 2003 - 2019 copyright by Melbourne Tiling Services pty. ltd.  |  Phone:1300 661658  |  Mobile:04 00228 128  |  Sales Department : sales@melbournetiles.com.au  |  Privacy Policy  | Sitemap
youtubeGoogle+twitter