| |
 |
 Nivoplan |
| Levelling mortar for walls from 2 to 30 mm. |
| Applications:Interior and exterior levelling “out-of-plumb” walls, rough or damaged renders, brick walls (for example before laying ceramic tiles). Suitable for applying in thin coats on all conventional surfaces (concrete, cement-lime mortar, cement mortar, etc.). To improve bonding or concistency of thin coats, add 2 or 3 litres of Planicrete per bag. |
| Coverage:1.4 kg/m2 per mm of thickness |
| Packing:25 kg bags. |
|
|
| |
 |
| Ultraplan |
| Ultra-fast drying self-levelling compound for thicknesses from 1 to 10 mm per coat. |
| Applications:Interior levelling on new or existing substrates, ready to receive all kinds of flooring where the maximum resistance to loads and traffic is required, as long as the floors are not subject to moisture. Levelling existing floors provided they are solid, dry and clean. Ultraplan can be applied in thicknesses up to 10 mm per coat. When applying over timber floors the minimum thickness should be 3 mm. The timber floor must be treated first with a coat of Mapeprim SP and a fibreglass mesh must be stapled to the substrate if the thickness of Ultraplan is greater than 5 mm. |
| Coverage:1.6 kg/m2 per mm of thickness. |
| Packing:23 kg bags. |
|
|
| |
 |
| Nivorapid |
| Ultra-fast setting thixotropic cement-based levelling mortar for horizontal or vertical surfaces. |
| Applications:Interior levelling on any kind of substrate normally found in the building industry as long as it is clean and not subject to moisture, such as concrete slabs and walls, masonry, renders and cement-based screeds. Also suitable for old floors and walls, natural stone and terrazzo floors. Suitable for repairing or levelling steps, edges of columns, landings and arrises of floors, walls and soffits. Particularly recommended where the substrate must be put back into use within a short time. |
| Coverage:1.6 kg/m2 per mm of thickness |
| Packing:25 kg bags, 4x5 kg boxes. |
|
|
| |
 |
| Plano3 |
| Fast setting self levelling smoothing compound. |
| Applications:Levelling compound for new or existing interior substrates, that are not subject to dampness, to make them suitable for the installation of all types of flooring where a good resistance to traffic and loads is required. Levelling compound for existing floors that are solid, dry and clean. Particularly suitable for the preparation of substrates at elevated levels as it is also easily applied by pump. Applied in coats from 3 to 10 mm. |
| Coverage:1.6 kg/m2 per mm of thickness |
| Packing:25 kg bags. |
|
|
| |
 |
| Primer G |
| Synthetic-resin-based water dispersion primer. |
| Applications:Treating gypsum or anhydrite surfaces prior to applying cement-based products (Kerabond, Ultraplan, Nivoplan, etc.). Treating cement-based surfaces (cast concrete and prefabricated walls etc.) prior to laying gypsum-based plasters. The substrate must be clean and absorbent. Dilute Primer G with water from 1:1 to 1:3 to protect old porous floors before levelling, to prevent residual dusting and to provide even absorption of substrates prior to levelling or laying. Apply on perfect dry gypsum or anhydrite surfaces (residual moisture content less than 0.5%). |
| Coverage:100-200 g/m2 depending on use. |
| Packing:25 - 10 - 5 kg drums and 12x1 kg |
|
|
| |
 |
| Primer S |
| Waterproofing primer in water dispersion. |
| Applications:Waterproofing gypsum-board, wood particle board and the like, gypsum plaster, etc. to be covered with ceramic tiles subject to the presence of water in bathrooms, showers, cooking areas, etc. For waterproofing anhydrite screeds before fixing ceramic tiles or other floors subject to frequent washing. Apply 2 to 3 coats on dry substrates and begin fixing after the primer is completely dry. |
| Coverage:approx. 100 g/m2 each coat. |
| Packing:5 kg drums and 12x1 kg packs. |
|
|
| |
 |
| Ultraplan Maxi |
| Ultra-fast drying self-levelling compound for thicknesses from 3 to 30 mm per coat. |
| Applications:Interior levelling on new or existing substrates, ready to receive all kinds of flooring where the maximum resistance to loads and traffic is required as long as floors are not subject to moisture. Levelling existing floors provided they are solid, dry and clean. Ultraplan Maxi can be applied in coats from 3 to 30 mm thick with a trowel or a pump. |
| Coverage:1.6 kg/m2 per mm of thickness |
| Packing:25 kg bags. |
|
|
