Waterproofing, Sealants

Services: Shower Repair Shower Fix

Standard Superseal $350

STOP Leaking Shower, Sealing shower, waterproofing,leaking recess shower,leaking tile,shower waterproofing:

The most common cause of leaking showers occur between the floor and wall joints of the shower recess.

• Up to 90% of showers built onto a stud wall will eventually leak as a result of normal (even minimal) building movement and vibrations such as those caused by opening and closing doors.
• The grouting cannot withstand the movement and the result is shower leakage via the gap/s between the floor and wall.
• Solid brick homes can also experience the same problem as leakage can occur between the wall and floor.
• Even showers with a shower tray/membrane can often only cope with small quantities of water, and are not equipped with self-drainage systems. Once the tray is full the overflow will leak into the floor and walls often being absorbed by woodwork and carpet in adjoining areas.
• As well as looking unsightly, these damp areas often smell, rot and attract white ants.
• Silicones and shower "plugging" products may work for a limited period (depending on the quality of the product and the amount of leakage). However, efforts to remove dirt/mould build-up exacerbate the problem as few of the sealants are resistant to abrasive powder cleansers and/or scouring brushes.

By totally preventing water from penetrating through the gaps and joins of the shower recess the Superseal Service provides a long-lasting, cost-effective solution.

On-site procedure

• The shower should be clean, dry and not be used the night before.
• A fully trained Superseal technician will assess the shower and explain what will be involved in the Superseal Service.
• A moisture meter used to determine the level of concealed water behind the tiles and a pressure gauge to indicate any possible plumbing problems.

Preparation

• Existing grout and sealant are removed where required from the angles of the shower walls, step and screen.
• Standard taps and handles are removed and all surfaces carefully prepared, cleaned and primed.
  

Superseal Applications

• Superseal is applied to the angles of the shower wall, around the edges of the floor waste, between the first row of tiles and around the shower base and hob.
• Superseal can be tinted as close as possible to match the tiles or grout.
• Cracks in the tiles may be Superseal at the discretion of the technician and the client.

Benefits

• Tiles don't need to be removed.
• The shower can be used the next day.
• No Noise, No Dust, No Smell, No Mess.
• Service time of around 2 1/2 to 3 hours.
• Superseal has been tested and proven in over 1450 showers monthly Australia wide.
• Superseal surfaces are anti-fungal, chemical, abrasive, water and grease resistant.
• Cleaning is also easier as the viscosity of the seal prevents dirt/mould build-up and is highly resistant to water, grease, scouring and use of abrasive cleaners.
• Will not peel off like other types of sealants.
• Adjoining areas are not affected or inconvenienced.
• It completely seals cracks in showers, baths, vanity tops, bathroom floors etc.
• Superseal can be coloured using oxides to colour the Superseal product to your personal choice to match grouting, wall or floor tiles
• Professional service at all times (from your first enquiry with our Sales Department to the specialised applicaiton by our technicians).
• All work is carried out by our fully trained technicians.
• Quality control program to ensure ongoing customer satisfaction and excellence of service.
• Reputable and licenced company with a proved operational period in business.

Plus the added confidence of Superseal Bathrooms' 12 year Superseal product guarantee.

BATH, VANITY AND BALCONY SERVICES
At the request of clients we provide "non-standard" Superseal service including bathroom repair and retiling.